Moog Music Animoog for iPhone - Manual (Page 24)

mAPPING mIDI CC s
To map a function, touch the desired parameter.
(All controls outlined in red can be mapped.) The
outline changes to green.
Adjust the desired control on your connected MIDI
device. The CC is now mapped, and the assigned CC
number displays on the specified Animoog control.
You can assign multiple CCs. When complete,
be sure to turn off MAP CCs, save your preset,
and save your CC Map.
mANUAL mAPPING
Tap a control twice to display the mIDI CC
mAPPING box, type in a VALUE, then touch SAVE.
To erase or change, tap a control twice, delete the numbers or type in a new
value, then touch
SAVE.
SAVE/LOAD CC mAP: Press this button to save and recall any of your CC maps.
NOTE: The X/Y Origins, Module controls, Envelope ADSR, and LFO can all be
MIDI mapped.