Sunpak auto 16R pro - Manual (Page 11)

23
Notes for Successive Firing
To prevent degradation due to overheating that may result from successive fi ring, it
is recommended to limit the number of fl ashes as shown in the following table and
pause fi ring for more than 10 minutes after the limit is reached.
Mode Max. number of successive flashes
Auto, Manual (1/1 – 1/2) 15 times
Manual (1/4 – 1/256) 20 times
Specifications and Performances
Guide Numbers (ISO 100, m)
Auto Mode Working
Range (m/ft)
Manual mode
1/1 16 f-value Range
1/2 11 F/2 8 m (26 ft)
1/4 8 F/4 4 m (13 ft)
1/8 5.6 F/8 2 m (6.6 ft)
1/16 4 F/16 1 m (3.3 ft)
1/32 2.8
1/64 2
1/128 1.4
1/256 1
Initial Number of Flashes and Recycling Time
Number of flashes (Full power) Recycling time (Full power)
“AA”-size alkaline batteries x 4 Approx. 100 times Approx. 8 sec.
“AA”-size NiMH batteries x 4 Approx. 180 times Approx. 6 sec,
z Number of flashes: Measured under the normal temperature, with new batteries that are within 3
months from their date of production, flashed every 30 seconds continuously and recycled to the point
at which the Ready lamp takes 30 seconds to come on after the last flash.
z Recycling time: The minimum time taken to activate the Ready lamp after firing under the above
conditions.
z Remove Batteries :After using auto 16R pro ,please remove batteries from the flash.If you leave
batteries in the flash, it may be damaged due to leak of battery liquid.
Operating temperature 0 to 40°C (32 to 104°F)
Dimensions Power supply section: 133(H) x 74(W) x 82(D) mm
Light emitting section: 121(H) x 121(W) x 33(D) mm
Weight Power supply section: 260 grams (9.17 oz) excl. batteries
Light emitting section: 145 grams (5.11 oz)
z The design and specifications of this product are subject to change without prior notice.
English