Shooting in mult (multi-firing) mode, Successive number of flashes in multi-firing mode – Sunpak auto 16R pro User Manual
Page 10
22
Shooting in MULT (Multi-firing) Mode
When the MODE button is set to “MULT,” the fl ash
enters the Multi-fi ring mode, in which a continuous
motion can be captured in a single picture just
like a stop-motion picture. The fi ring frequency
(number of fl ashes per second, expressed in Hz)
can be selected between 1 and 90 Hz. To set the
frequency, press the SEL button so that “Hz” blinks
and turn the rotary dial to select the desired value.
After this, press the SEL button so that the “Flash”
value blinks and then set the number of fl ashes.
The number of successive fl ashes can basically be selected between 2 and 99 but
it depends on the fi ring power and frequency. See the table on the right for details.
Other operations in this mode are identical to the Manual mode.
Example of Multi-fi ring operation
This photo is an example obtained
with a number of fl ashes of 9 (times),
frequency of 15Hz, PR of 1/16 and
f-value of f2.0.
Successive Number of Flashes in Multi-firing Mode
Power
Frequency
Number of
flashes
Power
Frequency
Number of
flashes
1/64
~
1/256
1 ~ 3
2 ~ 99
1/8
1
2 ~ 16
4 ~ 5
2 ~ 99
2
2 ~ 14
6 ~ 7
2 ~ 80
3
2 ~ 11
8 ~ 9
2 ~ 70
4
2 ~ 9
10 ~ 11
2 ~ 60
5 ~ 9
2 ~ 6
12 ~ 15
2 ~ 50
10 ~ 90
2 ~ 5
16 ~ 25
2 ~ 40
1/4
1
2 ~ 8
30 ~ 90
2 ~ 30
2
2 ~ 5
1/32
1 ~ 2
2 ~ 70
3 ~ 5
2 ~ 4
3 ~ 5
2 ~ 60
6 ~ 10
2 ~ 3
6 ~ 7
2 ~ 50
11 ~ 90
2
8 ~ 10
2 ~ 40
10 ~ 13
2 ~ 30
14 ~ 17
2 ~ 20
18 ~ 25
2 ~ 18
30 ~ 90
2 ~ 16
1/16
1
2 ~ 40
2 ~ 3
2 ~ 30
4
2 ~ 25
5 ~ 6
2 ~ 20
7
2 ~ 18
8
2 ~ 16
9
2 ~ 14
10 ~ 13
2 ~ 12
14 ~ 90
2 ~ 10