Model 6700 downflow, Installation and start-up procedures (cont’d.), Page 4 – Peerless Water 6700 - Service Manual User Manual
Page 4: Figure #1
Printed in U.S.A.
Page 4
MODEL 6700 Downflow
Installation and Start-up Procedures (Cont’d.)
13. Once the valve has reached Service position normal operation is resumed. In normal operation the Time Of Day,
and if flow meter equipped, Volume Remaining Displays alternate being viewed. Set the Time Of Day Display by
depressing the Up or Down Set Button, to the correct time. (See Fig. 1) Note: Time Of Day must be set correctly to
either A.M. or P.M.
14. Flow Meter Equipped Valve Only: The Volume Remaining Display is the volume of water (in gallons) remaining
prior to regeneration, including any reserve capacity. Without any water usage the Meter Arrow should be either off
or on but not changing. Open a soft water tap. The Meter Arrow should begin flashing at a rate that varies with flow
rate. Close the tap after 3 - 5 gallons of water flow.
Figure #1
Volume Remaining Display Indicator
Time of Day Display Indicator
Service Indicator:
Valve In Service
- Arrow On
Manual Regeneration Tonight - Flashing Arrow
Reserve Indicator:
Volume Remaining Above Reserve
- Arrow Off
Volume Remaining At Or Below Reserve
- Arrow Flashing
Regeneration Indicator
Valve In Regeneration - Arrow On
Flow Indicator:
Arrow Flashes With Water Flow
For Example:
12:59 A.M.
(Valve in Service)
For Example:
0 Gallons Of Water Remaining
(Valve in Service)
(Water flowing, Meter Arrow flashing)
(Volume is below reserve capacity)
(Reserve Arrow flashing)
For Example:
833 Gallons Of Water Remaining
(Valve in Service)