Grain Systems Tanks PNEG-4021 - Manual (Page 79)

PNEG-4021 40 Series 18', 21' and 24' Diameter Bins 79
9. Manway Cover Assembly
Round Manway Cover
Round manway cover detail for bins 60' and smaller.
Figure 9A
Apply caulking to underneath side of moisture diverter to seal between the corrugated roof sheet and
diverter. Attach the moisture diverter and hinge base to manway roof sheet with 5/16" x 3/4" bolts and nuts.
Place hinge leaf on manway cover and bolt both hinge parts together with 3/8" x 1" bolts and lock nuts.
Attach the handle with two (2) #10-24 x 5/8" long bolts and #10-24 lock nuts. Slip a 5/16" nut in the latch
bar, thread on the shaft of handle and adjust latch bar so it will catch the bottom side of the manway sheet.
Snap the manway seal strip to the manway seal.
(See Figure 9A.)
Ref # Part # Description Ref # Part # Description
A ACD-4505 Hinge Leaf H 5/16" Flange Nut
B ACD-4504 Manway Cover I CRP-4999 Moisture Diverter
C ACD-4513 Handle J ACD-4506 Hinge Base
D CRP-5003 Handle Gasket K Double Nut these Bolt
E ACD-4514 Latch L 5/16" x 3/4" Bolts
F Manway Roof Sheet
M
DC-GBC-1A
DC-GBC-1S
Suffocation/Flighting Danger Decals
(Located Under Cover)
English
Spanish
G CRP-4998 Manway Seal Strip