Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1412 - Manual (Page 4)

4 PNEG-1412 Two Leg Towers
This assembly manual is for 2-Leg Towers for Chain Loop & catwalk support . Be sure and review all
pages before planning foundation work. Depending on application, your foundation could vary.
Choose the anchor bolt layout that fits your design and follow those dimensions for proper layout.
Once all concrete work is done and bins have been erected locate parts and hardware for towers.
Check packing list and count all parts. Report any missing components. Layout and sort parts for
easy identification. Depending on your work environment, these instructions may need to be altered
to fit your needs.
Drift Punches for 3/8" to 1/2" Bolts
3/4" Wrenches & Sockets
Ratchet & Impact Gun
9/16" Wrenches and Sockets
String
The tower can be assembled flat laying on a level surface and stood upright after all hardware has
been tightened. Make sure tower legs are aligned and straight!
OVERVIEW
TOOLS