Grain Systems Bin Accessories PNEG-1112 - Manual (Page 29)

2. Installation
PNEG-1112 Sidewall Bin Stair Assembly 29
Attach Handrail Baluster to Knee Brace
1. Bring the bottom of the handrail baluster to the top of the nearest installed knee brace.
2. Loosely attach the handrail baluster to the knee brace using two (2) 5/16'' x 3/4'' bin bolts and
serrated flange nuts. The head of the one (1) bin bolt should be on the handrail baluster and the
head of the other bin bolt should be on the knee brace.
3. Attach handrail baluster to the outside stair siderail using a 5/16" x 3/4" bin bolt and serrated
flange nut.
Figure 2AE
Final Adjustments of First Stair Section
1. Adjust the steps to fit the curve of the bin. Use a level to ensure the steps are level in all directions.
2. Tighten all bin bolts and serrated flange nuts that assemble the stair section.
3. Tighten the bin bolts and serrated flange nuts that attach the stair section to the platform, wall
brackets, and knee braces.