Grain Systems Tanks PNEG-4072A - Manual (Page 80)

Chapter 7: Roof Assembly
Figure 7-9 Installing a temperature cable bracket
A Roof rafter D Left purlin clip (CTR-0099)
B 10 in. temperature cable bracket (CTR-0013) E 1/2 x 1-3/4 in. flange bolt (S-10252)
C Right purlin clip (CTR-0100) F 1/2 in. flange nut (S-10253)
3. Install a quick link (C) to each cable bracket (B) to support the temperature cables.
IMPORTANT: Do not attach weights to the temperature cables; secure the bottom of cables to the
floor with light twine. No roof rafter shall support more than one cable.
80 Pneg-4072A 72 Ft Diameter 40-Series Bin