Grain Systems Tanks PNEG-4072A - Manual (Page 141)

Chapter 8: Accessories
Figure 8-18 Bottom ladder bracket
A Ladder assembly E 5/16 x 3/4 in. flange bolt (S-7482)
B Ladder bottom bracket (LDR5133) F 3/8 in. field drilled hole location
C 5/16 in. flange nut (S-396) G 5/16 x 3/4 in. flange bolt (S-7482)
D 3/8 in. field drilled hole location H 5/16 in. flange nut (S-396)
Guidelines for Installing a Sidedraw System
A sidedraw system will allow content unloading using gravity, and is done from the side of the bin.
General Guidelines to Follow Before Installing A Sidedraw System:
NOTE: If a sidedraw system is installed, the standard 3/4 in. anchor bolts must be replaced with 1 in.
anchor bolts.
• Side discharge is only permitted in GSI commercial bins when a GSI manufactured sidedraw flume
system has been installed. No corrugated steel bin must be unloaded through the side wall without
installation of such a system and permission of the manufacturer.
• A sidedraw should not be the only discharge system available. A standard center discharge and con-
veyor must be installed.
Pneg-4072A 72 Ft Diameter 40-Series Bin 141