Grain Systems Tanks PNEG-257 User Manual
Page 62
10. Ladder
62
PNEG-257 12', 15', 18' and 21' Bulk Feed Tanks BFT and GHT Series
Start attaching ladder at the eave (top) of the Bulk Feed Tank. After the first ladder has been attached to
the sidewall of tank, attach ladder extension rails to the ladder as shown
. Refer to
for proper ladder placement in relation to the eave of the tank. Use hex head bolts on all safety cage
connections. Attach hoop brackets and adjustable safety cage brace to the top of the extension rails.
Be sure to attach the adjustable brace on the left side of the ladder. Now attach the opposite end of the
adjustable brace to the roof ladder rail. After completing this, drill two (2) 5/16" holes through the adjustable
brace and use 1/4" x 1-1/2" bolts and nuts to secure the two (2) braces together.
Add the safety cage hoops to the brackets and attach vertical supports to the hoops. Continue adding
ladder sections and safety cage as sidewall rings are attached. Included in the safety cage package are
two (2) bell hoop halves
which should be located at the bottom of the safety cage. Follow
all drawings and details for proper placement of parts and proper location of safety cage.
Figure 10E Side View
Figure 10F Front View