beautypg.com

Inside ladder bottom bracket – Grain Systems Bin Accessories PNEG-1859 User Manual

Page 78

background image

10. 2.66" Commercial Tank Accessories Installation

78

PNEG-1859 2.66" Corrugation 135' Diameter Tank with 50 PSF Snow Roof

Inside Ladder Bottom Bracket

The bottom ladder section may need to be cut off if the length is too long. Cut the bottom section at least
12" from the bottom of the floor. Attach the bottom inside ladder brackets (LDR-5133) to the last ladder
section using the six (6) holes per ladder rail. You may need to drill out the holes in the last ladder section
with a 3/8" drill bit. You will also need to drill two (2) 3/8" holes through the sidewall to attach each bottom
bracket to the sidewall. Use 5/16" hardware at all attachment points.

(See Figure 10S.)

Figure 10S

See also other documents in the category Grain Systems Equipment: