Banks Power Chevy_GMC Trucks: Duramax LLY (Diesel ’04 - 05 6.6L) Speed Control- SpeedBrake, Advance User Manual '04-05 For use with PowerPDA - Manual (Page 3)

97226 v.1.0
3
Startup
Turn the PowerPDA on with the power
button on the upper right hand corner
of the PDA. Once the SpeedBrake
software has been installed on the
Palm Tungsten E2, the “Banks Brake”
icon should appear on the Home
screen of the PDA. To access the
Home screen, press the Home button
on the face of the PDA (see
Figure 1). The “Banks Brake” icon
should appear among the program
icons as shown in Figure 2. If the
Banks Brake icon is not present,
please refer to the installation
instructions, Section 4 for Software
Installation.
To access the SpeedBrake System
Monitor Screen as seen in Figure 3,
press the “Banks Brake” icon. This
screen will be the primary display used
during SpeedBrake operation.
Section 1
BaNkS SPeeDBrake FuNCTioN overview
Figure 1 SpeedBrake PowerPDA 5-way Navigation Button
Change Preset Speed
Increase speed in 1
MPH intervals when in
Speed Control Mode
or Increase Braking
Strength level when in
Brake Mode
Decrease speed in 1
MPH intervals when in
Speed Control Mode
or decrease Braking
Strength level when
in Brake Mode
Mode
Select
Center
Button
Home Key
Menu Key
Figure 2 BanksBrake icon Shown
with Tuner program installed.