Velleman CAMIP11 Quick Installation Guide - Manual (Page 6)

1
1. OVERVIEW
1.1 Product Features
 Easy network setup with your iPhone / iPad
 ONVIF standard supported to simplify system integration
 POE (Power-over-Ethernet) support to eliminate the use of power cables and reduce installation costs
 External alarm I/O device connection

Remote Surveillance
-- Fully compatibility on iPhone & iPad, and Internet Explorer® on Windows® operating system
 35 IR LEDs built-in for night surveillance
 1.3 Megapixel with HDTV 720p quality, allowing users to notice minor details more easily
1.2 Package Content
□ Network camera □ Bracket □ Quick Setup with iPhone / iPad
1.3 Cable Overview
Color Cable Description
-- Power cable
Connect to DC12V power supply.
Note: The power adapter is optional.
-- RJ45 network cable Connect it to the supplied RJ45 cable extender adapter for cable extension, and prepare
another RJ45 network cable with suitable length for your connection.
Black & Brown GND Ground wire, used for reset default or external device connection.
Yellow Alarm-in Reserved for connecting to an external alarm device. For details, please refer the user
manual of your alarm device.
Pink Alarm-out
Reserved for connecting to an external alarm
device. For details, please refer the user manual
of your alarm device.
Red RESET Remove the insulating coating of this wire, and twist it with a ground wire together to reset
default. This will reset all parameters, including the IP address to factory default settings.
Note: Disconnect power before twisting these two wires together, and connect to
power again for reset default.