Velleman CAMIP11 Quick Installation Guide User Manual

Page 24

3.7.7 Maintenance

Firmware Upgrade

This function is used when users need to upgrade the camera for function scalability.

Note: Before using this function, make sure you have the correct upgrade files provided by your

installer or distributor.

Note: The event videos saved in the camera will be removed after firmware upgrade. Make sure you’ve

copied important events to your PC before firmware upgrade.

Step1: Select “

” to browse to where you save the upgrade files, and select them one by one until all files are

selected (up to four files).

Step2: Select “Upgrade” to start system upgrading.

Note: You’ll be prompted to keep current configurations. It’s recommended to keep them, or all

configurations will be restored to default values after upgrade.

Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during

firmware upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.