Quick installation guide, Introduction, Safety instructions – Velleman CAMIP5N1 Quick Installation Guide User Manual
Page 4: General guidelines, Overview, Hardware installation and operation
CAMIP5N1
V. 01 – 08/02/2013
4
©Velleman nv
QUICK INSTALLATION GUIDE
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! It is strongly recommended to read the full version manual thoroughly
before bringing this device into service the first time. The complete user manual can be found in multiple
languages on the included CD-ROM.
2.
Safety Instructions
Keep the device away from children and unauthorised users.
Risk of electroshock when opening the cover. Touching live wires can cause life-threatening
electroshocks. Do not open the housing yourself. Have the device repaired by qualified
personnel.
DO NOT disassemble or open the cover. There are no user-serviceable parts inside the device.
Refer to an authorized dealer for service and/or spare parts.
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of the full user manual which
can be found on the included CD ROM.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.
Keep this device away from dust and extreme heat.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
DO NOT use this product to violate privacy laws or perform other illegal activities.
4.
Overview
Refer to the illustrations on page 2 of this manual.
1
light sensor
7
audio output
2
IR LED (11x)
8
audio input
3
speaker
9
8P8C network jack (RJ45)
4
lens
10
power LED
5
microphone
11
network LED
6
Wi-Fi antenna
12
5V DC input jack (2A)
5.
Hardware installation and operation
1. Choose a location for the camera, keeping following guidelines in mind:
o
Do not install the camera in locations where extremely high or low temperatures or excessive
vibrations may occur.
o
Avoid mounting the camera near high electro-magnetic fields.
o
Do not aim the camera at the sun or other extremely bright objects.