Velleman VLE4 - Manual (Page 7)

VLE4
18.03.2010 ©Velleman nv 7
• Press the discharge button [5] within 1 minute after connecting the
charger to the mains. After 1 minute of charging, the button is
disabled automatically.
• The word DISCHARGE is shown and the battery icons will flash
until all batteries are discharged.
• When discharging is completed, charging starts automatically.
USB port
• When no batteries are present inside the charger or all inserted
batteries are fully charged, the USB port [7] becomes available. The
USB available icon [B] is shown.
• Make sure the load connected to the USB port does not exceed
500mA.
7. Technical specifications
input voltage 12VDC / 1000mA (mains adaptor incl.)
mains adaptor 100-240VAC / 50-60Hz
output
AA/C/D 1300mA charging current
AAA 500mA charging current
9V 30mA
USB
5VDC - 500mA
discharge current 400mA (AA/AAA/C/D)
number of channels 4
dimensions 127 x 172 x 65mm
weight ±420g
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this user
manual, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior
notice.