Example, 1 start mode – Velleman VDPC054 User Manual
Page 6
VDPC054
V. 02 – 11/09/2013
6
©Velleman nv
Page
Channels
Device no.
DMX start address
5
25-30
device 5
25
6
31-36
device 6
31
7
37-42
device 7
37
8
43-48
device 8
43
9
49-54
device 9
49
Example
As an example, you have 9 identical DMX devices (6 channels each)
connected to the controller (one page = one device). The 6 channels are for
pan, tilt, dimmer, colour, gobo, and strobe control. Refer to the table below
for an overview of the channels and which pages/faders you use to control
them.
Device /
page
Function
Pan
Tilt
Dimmer Colour
Gobo
Strobe
1
1
2
3
4
5
6
2
7
8
9
10
11
12
3
13
14
15
16
17
18
4
19
20
21
22
23
24
5
25
26
27
28
29
30
6
31
32
33
34
35
36
7
37
38
39
40
41
42
8
43
44
45
46
47
48
9
49
50
51
52
53
54
Use fader:
1
2
3
4
5
6
Note: You can also use the controller for devices with more than 6 DMX
channels. In that case, use multiple pages per device. This possibility is not
further explained in this user manual.
7. Use
7.1 Start Mode
For all the procedures described below to work correctly, you normally begin
from the start mode. In start mode, the display shows ―— — — —‖. If the
display does not show this, you can return to start mode as follows,
depending on the active operating mode:
press A once
press B once