Velleman PCTV2 User Manual
Page 4
PCTV2
V. 02 – 12/09/2013
4
©Velleman nv
3. Overview
Refer to the illustrations on page 2 of this manual.
1
HDMI port
4
USB OTG port
2
reset button
5
micro USB power port
3
micro SD port
6
USB port
4. Connecting the device
The device has the following ports and buttons:
1
HDMI port
Plug the HDMI port of the device directly to
the HDMI port of your TV, monitor or
beamer, no cable needed.
2
Reset button
Press to reset the device.
3
Micro SD port
Expand the memory of the device with a
micro SD card (max. 32 GB)
4
USB port
Use the USB OTG port to connect the device
to your pc (for example for data transfer) or
any USB device (mouse, keyboard…).
5
Micro USB
power port
Connect the device with the included to USB
power cable to your TV for charging.
6
USB port
Connect any USB device to this port
(mouse, keyboard…).
5. Start using the device
To start using the device:
1. Connect the device on the HDMI port of your TV, monitor or
beamer.
2. (For TV only): Use your TV remote control to select the mini
computer as the HDMI source (as you would do with another
HDMI source).
The start screen of the mini computer will appear.
6. Shutting down the device
To shut down the device:
1. In the toolbar at the bottom, click the
button and press OK.
2. Wait until the device has shut down to disconnect it.