Velleman WIFIR3 - Manual (Page 19)

WIFIR3
V. 01 – 22/08/2013 19 ©Velleman nv
12. Reset
If necessary, you can reset the repeater with a needle. Press and
hold the reset button for 10 seconds.
This will reset all the settings to factory defaults.
13. Power outage
If a power outage occurs, remove both the router and the repeater
from their wall sockets and reconnect them.
14. Technical Specifications
wireless standards
IEEE 802.11n / IEEE 802.11g / IEEE 802.11b
networking standards 10/100 Mbps
frequency range 2.4 - 2.485 GHz
wireless transfer rates 11/54/150/270/300 Mbps
power supply 230 Vac 50 Hz
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
Windows, Windows XP, Windows 2000, Windows Vista, Windows
Aero, Windows 7, Windows 8, Windows Mobile, Windows Server are
registered trademarks of Microsoft Corporation in the United States
and other countries.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.