Velleman WIFIR3 User Manual

Page 17

WIFIR3

V. 01 – 22/08/2013

©Velleman nv

2. In Select SSID, you can select:

Root Client–XXXX The password of the repeater is the same as the

password of your XXXX router.

Repeater AP –

WiFi-Repeater1

Select this option to set up a password for the

WiFi repeater.

Reset, backup and restore
You can back up the settings of the repeater for security reasons.

Also, if you use the device in different settings, you can easily save

and reload the different settings.

1. Log on to the management tool and select

Save/Reload Settings.

•

To make a backup file of the current settings, click the Save

button and choose a location for the settings file. You can save as

many setting files as you need.

•

To upload previously saved settings, click the Browse button and

select the saved settings file on your computer. Next, click the

Upload button to load the settings. The current settings will be

replaced with the settings in the file that you loaded.

•

To remove all the configuration settings you have made and reset

the device to the factory defaults, click the Reset button.

Firmware upgrade
To upgrade the firmware of your repeater, proceed as follows:

1. Download the new firmware from our website to your computer.

2. Log on to the management tool and choose

Management > Upgrade Firmware.