Velleman WIFIR3 - Manual (Page 16)

WIFIR3
V. 01 – 22/08/2013 16 ©Velleman nv
3. Select the repeater network from the list and then click
Connect.
4. If required, type the network password and click OK to confirm.
You will see a confirmation message when you are connected to
the network.
11. Web Management Tool
Wireless basic settings
In your web browser, open the web management tool and select
Wireless > Basic Settings.
The page contains various settings, including:
Disable Wireless
LAN Interface
If this option is selected, wireless network is
switched off.
Mode Supports AP and Repeater modes
SSID of Wireless
AP
Main Service Set Identifier. This is the name
of your wireless network.
SSID of Extended
Interface
Universal Repeater Mode (acting as AP and
repeater simultaneously)
Band Supports 11B/11G/11N mixed modes.
Wireless security settings
Set up the wireless security and encryption to prevent unauthorised
access and monitoring. Supported encryption methods are:
64/128-bit WEP, WPA, and WPA2.
1. Log on to the webtool and select Wireless > Security.