Milton CAT 160M - Manual (Page 23)

23 160M Motor Grader specifications
Weights
Gross Vehicle Weight – Base
– Total 15 903 kg 35,060 lb
– Front Axle 4389 kg 9,677 lb
– Rear Axle 11 514 kg 25,383 lb
– Total with AWD 16 583 kg 36,560 lb
Gross Vehicle Weight – Max
– Total 23 947 kg 52,795 lb
– Front Axle 8382 kg 18,478 lb
– Rear Axle 15 565 kg 34,317 lb
• Base operating weight calculated on standard machine
configuration with 14.00-24 10PR (G-2) tires, full fuel tank,
coolant, lubricants and operator.
Standards
ROPS/FOPS ISO 3471/ISO 3499
Steering ISO 5010:1992
Brakes ISO 3450:1996
Sound ISO 6394:1998/
ISO 6395:1988
• The static sound operator pressure level measured
according to ISO 6394:1988 for a cab offered by Caterpillar,
when properly installed, maintained and tested with doors
and windows closed and hydraulic fan at maximum speed
is 70 dB(A).
• The dynamic spectator sound power level for the standard
machine when equipped with sound suppression package
and hydraulic fan running at 70% of maximum speed,
machine sound measured is less than 107 dB(A), complying
with EU 2000/14/EC requirement.
Ripper
Ripping Depth, Maximum 428 mm 16.8 in
Ripper Shank Holders 5
Ripper Shank Holder Spacing 533 mm 21 in
Penetration Force 9472 kg 20,883 lb
Pryout Force 8555 kg 18,861 lb
Machine Length Increase, 919 mm 36.2 in
Beam Raised
Scarifier
Front, V-Type, 5 or 11 tooth
Working Width 1205 mm 47.4 in
Scarifying Depth, Maximum 467 mm 18.4 in
Scarifier Shank Holders 5/11
Scarifier Shank Holder Spacing 116 mm 4.6 in
Mid, V-Type
Working width 1184 mm 46.6 in
Scarifying Depth, Maximum 292 mm 11.5 in
Scarifier Shank Holders 11
Scarifier Shank Holder Spacing 116 mm 4.6 in
Mid, Straight
Working Width 1800 mm 71 in
Scarifying Depth, Maximum 317 mm 12.5 in
Scarifier Shank Holders 17
Scarifier Shank Holder Spacing 111 mm 4.4 in
Rear
Working Width 2300 mm 91 in
Scarifying Depth, Maximum 266 mm 10.5 in
Scarifier Shank Holders 9
Scarifier Shank Holder Spacing 267 mm 10.5 in