Milton CAT 160M - Manual (Page 17)

Moldboard Options. A 4.3 m (14 ft)
moldboard is standard on the 160M, with
an optional 3.7 m (12 ft) or 4.9 m (16 ft)
moldboard available from the factory.
Left and right side moldboard extensions
are also available, increasing versatility.
Ground Engaging Tools (GET). A wide
variety of Caterpillar GET is available
on the 160M, including cutting edges,
graderbits and end bits, all designed for
maximum service life and productivity.
Front Mounted Groups. A front mounted
push plate/counterweight or front lift
group can be ordered on the 160M.
The Caterpillar Work Tools front lift
group can be combined with a front
dozer blade or front scarifier for
added versatility.
Rear Ripper/Scarifier. The 160M optional
ripper/scarifier is made to penetrate tough
material fast and rip thoroughly for easier
material movement with the moldboard.
The ripper includes three shanks with
the ability to add two more if needed.
Nine scarifier shanks can also be added
for additional versatility.
Snow Removal Work Tools.
Caterpillar Work Tools offer a variety
of snow removal equipment specifically
for the 160M. Multiple snow plow, snow
wing and mounting options are available,
adding additional machine versatility
and utilization throughout the year.
Automatic Lubrication System.
The optional Lincoln Automatic
Lubrication System maintains the proper
grease lubrication on working surfaces,
significantly extending component life.
Contaminants are purged from open pins
and bushings to help prevent dirt from
damaging critical components.
Air Compressor. An optional air
compressor is available, giving you a
convenient on-board air system to blow
debris off the machine and operate
power tools.
Fast-Fill Fuel Option. The 160M offers
a Fast-Fill option allowing customers to
refuel in less than two minutes for fast,
accurate filling and reduced downtime.
17