Milton CAT 305.5D CR - Manual (Page 7)

7
Dozer Blade
Standard dozer blade maximizes productivity.
Simple Dozer Control with Float Function
The dozer function is pilot controlled from inside the cab, providing smooth,
proportional operation. The standard float function is enabled by pushing the
lever fully forward into the detent position. Cleanup and backfilling is easier
since the operator does not have to adjust the blade height during travel.
Excellent Blade Visibility
Visibility to the blade is excellent in any position, allowing the blade to be
positioned behind the operator and away from the front linkage for better
access when back dragging and finishing in tight areas.
Angle Blade Option
Increase machine versatility with the Cat angle dozer blade. Built for strength
and durability, the hydraulic angle blade features a hardened steel wear edge and
good protection to cylinders and hydraulic lines. The angle blade can be positioned
straight ahead or angled up to 25 degrees to the left or right. This reduces the
number of times required to back up and reposition when backfilling so you can
finish the job faster. All functions of the blade are controlled with one joystick
using a proportional roller switch for the angle function.
Undercarriage
Stability and durability.
Rubber Track
The standard rubber track lets you
work on multiple surfaces such as
grass, pavement or stone without
damaging the surface or machine.
Steel Track Option
Optional steel track is available
for harsh conditions such as
demolition. The extra weight of
the steel tracks generally provides
better stability when digging
over the side of the machine.
(Not available on the 304D CR.)
Rubber Pads
Optional rubber pads can be
attached to the steel track to
prevent damage to paved surfaces
and minimize noise and vibration
during travel with the steel track
system. This option provides
the maximum overall stability.