Specifications, Engine, Weights – Milton CAT 312D L User Manual
Page 11: Swing mechanism, Drive, Hydraulic system, Service refill capacities, Standards, Sound performance

11
Engine
Engine Model
Cat
®
C4.2 ACERT™
Gross Power
72 kW
97 hp
Net Power
67 kW
90 hp
SAE J1349
67 kW
90 hp
Bore
102 mm
4.02 in
Stroke
130 mm
5.12 in
Displacement 4.25
L
259.3
in
3
• Net power advertise is the power available
at the flywheel when the engine is equipped
with fan, air cleaner, muffler and alternator.
• No engine derating required below 2300 m
(7,500 ft) altitude.
• The 312D meets U.S. EPA Tier 3 and
EU Stage IIIA Directive/97/68/EC
emissions requirements.
Weights
Operating Weight – 12 920 kg 28,480 lb
Standard Undercarriage
Operating Weight – 13 450 kg 29,650 lb
Long Undercarriage
• Standard undercarriage: 500 mm (20") shoe,
3.0 m (9'10") stick, 0.52 m
3
(0.68 yd
3
) bucket.
• Long undercarriage: 600 mm (24") shoe,
3.0 m (9'10") stick, 0.52 m
3
(0.68 yd
3
) bucket.
Swing Mechanism
Swing Torque
30 950 N·m 22,827.5 lb ft
Swing Speed
12.4 rpm
Drive
Maximum 114
kN
25.6
lb
Drawbar Pull
Travel Speed
5.5 km/h
3.4 mph
Hydraulic System
Main Implement
127 L/min 33.5 gal/min
System – Maximum
Flow (2x)
Maximum Pressure 30 500 kPa 4,424 psi
– Implements
Maximum Pressure 35 000 kPa 5,076 psi
– Travel
Maximum Pressure 23 000 kPa 3,336 psi
– Swing
Pilot System –
36 L/min
9.51 gal/min
Maximum Flow
Pilot System –
4120 kPa
598 psi
Maximum Pressure
Boom Cylinder
110 mm
4.3 in
– Bore
Boom Cylinder
1015 mm 39.9 in
– Stroke
Stick Cylinder
120 mm
4.7 in
– Bore
Stick Cylinder
1197 mm 47.1 in
– Stroke
Bucket Cylinder
100 mm
3.9 in
– Bore
Bucket Cylinder
939 mm
36.9 in
– Stroke
Service Refill Capacities
Fuel Tank
250 L
66 gal
Cooling System
17.9 L
4.73 gal
Engine Oil
19.5 L
5.1 gal
Swing Drive
3 L
0.79 gal
Final Drive (Each) 3 L
0.79 gal
Hydraulic System
162 L
42.8 gal
(Including Tank)
Hydraulic Tank
150 L
39.6 gal
Standards
Cab/FOGS
SAE J1356 FEB88
ISO 10262
Sound Performance
Performance:
• The operator sound exposure Leq (equivalent
sound pressure level) measured according
to the work cycle procedures specified in
ANSI/SAE J1166 OCT 98 is 73 dB(A), at
standard ambient, for the cab offered by
Caterpillar, when properly installed and
maintained and tested with the doors and
windows closed.
• Hearing protection may be needed when
operating with an open operator station and
cab (when not properly maintained or doors/
windows open) for extended periods or in
noisy environment.
312D/312D L Hydraulic Excavator Specifications