Milton CAT 325D FM - Manual (Page 21)

21 325D FM Forest Machine specifications
325D FM GF Mass Boom Lift Capacities
CONFIGURATION – 5.55 m (18'3") Boom, 3.2 m (10'6") Stick,
Standard Counterweight
SHOES – 700 mm (28") Double Grouser
* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
Weight of all lifting accessories must be deducted from the above lifting capacities.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft
Load at
Load
Maximum Reach
Point Over Over Over Over Over Over Over Over Over Over Over Over m
Height Front Side Front Side Front Side Front Side Front Side Front Side ft
7.5 m kg *5350 *5350 6.68
25.0 ft lb *15,300 *15,300 *11,800 *11,800 21.59
6.0 m kg *8300 *8300 *5900 *5900 *5050 *5050 7.66
20.0 ft lb *18,150 *18,150 *11,150 *11,150 24.96
4.5 m kg *9250 *9250 *8100 7750 *5050 *5050 8.25
15.0 ft lb *20,100 *20,100 *17,000 16,600 *11,100 *11,100 26.99
3.0 m kg *15 950 *15 950 *13 500 *13 500 *10 600 10 400 *9150 7550 *5250 *5250 8.53
10.0 ft lb *41,750 *41,750 *29,150 *29,150 *22,950 22,450 *19,950 16,300 *11,500 *11,500 27.98
1.5 m kg *7350 *7350 *16 050 15 300 *11 900 10 050 *9800 7400 *5600 *5600 8.54
5.0 ft lb *17,250 *17,250 *34,600 32,900 *25,750 21,700 *21,250 15,950 *12,300 *12,300 28.04
Ground kg *10 250 *10 250 *17 250 14 900 *12 700 9850 *10 150 7250 *6300 *6300 8.28
Line lb *23,250 *23,250 *37,350 32,050 *27,500 21,200 *22,000 15,650 *13,800 *13,800 27.17
–1.5 m kg *9800 *9800 *15 600 *15 600 *17 100 14 750 *12 700 9750 *9850 7250 *7500 7000 7.72
–5.0 ft lb *21,900 *21,900 *35,300 *35,300 *37,050 31,750 *27,550 20,550 *19,300 15,600 *16,550 15,400 25.29
–3.0 m kg *15 600 *15 600 *21 900 *21 900 *15 550 14 850 *11 550 9800 *9700 8350 6.78
–10.0 ft lb *34,950 *34,950 *47,350 *47,350 *33,600 31,950 *24,750 21,100 *21,300 18,500 22.12
–4.5 m kg *16 200 *16 200 *11 650 *11 650 *9450 *9450 5.26
–15.0 ft lb *24,550 *24,550 *20,700 *20,700 16.94
Forestry Grapples
Specification GLL 52 GLL 55 GLL 60
Part # 271-1533 271-1534 271-1535
For use with 320C FM, 324D FM 324D FM, 325D FM 325D FM, 330D FM
Rotation Continuous Continuous Continuous
Rotation torque 1153 N • m (850 ft-lb) 1153 N • m (850 ft-lb) 1153 N • m (850 ft-lb)
Max. Opening 1321 mm (52") 1397 mm (55") 1524 mm (60")
Min. Opening 126 mm (5") 126 mm (5") 126 mm (5")
Weight 1255 kg (2,767 lb) 1291 kg (2,840 lb) 1344 kg (2,965 lb)
Width 521 mm (20.5") 521 mm (20.5") 521 mm (20.5")
Height, open 2134 mm (84") 2184 mm (86") 2261 mm (89")