GLOBALSAT TR-151 - Manual (Page 8)

1.2.2 How to configure TR-151 by GPRS server?
You can send command by GPRS server to configure following parameters into TR-151.
There are 8 settings as below.
z SMS Default Return Phone Number
z Maximum GPS Fixing Time
z Default Report Mode Setting
z SOS Numbers
z Motion setting
z Sleeping setting
z GPRS setting
z Normal Setting
Report type Format Return message
SMS Default
Return Phone
Number $7,IMEI,1,Enable_SMS Default Return Phone Number,
SMS Default Return Phone Number! $OK!
Maximum GPS
Fixing Time
$7,IMEI,2,Maximum_GPS_Fixing_Time!
$OK!
Default Report
Mode Setting $7,IMEI,3,Default_Report_Mode,Report_Interval,Number_of_Reports,R
eport_Format,Return Phone Number For Default Report Mode! $OK!
SOS Numbers $7,IMEI,4,SOS1,SOS2,SOS3! $OK!
Motion Setting $7,IMEI,5,Regular Report Interval,Motion report
Interval,Sensitivity,Motion_Return_Number! $OK!
Sleeping
Setting $7,IMEI,6, Regular_Report_interval,
Motion_report_Interval,Number_of_Reports,Report_Format,Sensitivity,S
leep_Return_Number! $OK!
GPRS Setting $7,IMEI,7,Port,APN,User_Name,User_pwd,DNS1,DNS2,Host_Name,R
eturn_Phone_Number! $OK!
Normal setting $7,IMEI,8,Name,Time_Zone,Report_method,Echo_EN,Return_Phone_
Number! $OK!
„
SMS Default Return Phone Number: Set SMS Default Return Phone Number.
„ Maximum_GPS_Fixing_Time:
If GPS is not fixed within the time, it returns previous location and close GPS.
The unit is minute.
„ Default_Report_Mode:
Default_Report_Mode = 0 Æ SMS immediate report
Default_Report_Mode = 1 Æ SMS period report
Default_Report_Mode = 2 Æ Stop
Default_Report_Mode = 8 Æ GPRS immediate report
Default_Report_Mode = 9 Æ GPRS period
Default_Report_Mode = 10 Æ GPRS period and disconnect
Default_Report_Mode = 21 Æ SMS and GPRS immediate report
8