Deflecto EVE_6 - Manual

Technical
Performance Data
Model No. Description Color
for plastic molded under the eave / soffit vent
Deflecto's policy is one of continual product improvement in design and manufacturing wherever possible,
therefore all specifications and designs are subject to change without notice and without incurring obligations. 13.09 EVEtps-A
Technical Product Specifications
General Information
EVE/6 Undereve Vent ® White
Undereve-Vent ®
• Calcium filled Polypropylene
• Melting point: 325
º F/ 163 C approx.
• UV Inhibitor added
• quick, easy installation
• easily installs over the exhaust hole,
under the eave (soffit) to exhaust air
from bathroom fans
© 2013
DEFLECTO LLC • P.O. Box 50057 • Indianapolis, IN 46250 • www.deflecto.com
DEFLECTO/Canada Ltd. • St. Catharines, Ontario • Canada L2M 3Y2 • www.advp-deflecto.com
Application View
EVE/6
10
1
/
8
"
3
1 /
16
"
2"
4
13 /
16
"
2
1 /
4
"
7"
• helps prevent cold air from entering
home, birds from nesting in vents and
rodents from entering through vents
• all components constructed of heavy-duty
plastic
opening in soffit can be up to 5" diameter
for best installation practrice use our
EVEK4 kit to make a connection to the
exhaust duct
duct clips for holding duct
damper damper
Undereve Vent ®
Undereve Vent ® – For Bathroom Exhaust Venting (Soffit)
•
•
5" max diameter
For dryer venting cut the entire grid out at
both ends. Leave the center rib. Use tin snips
to cut grid out before installing hood to soffit.
cut grid out
leave center rib
cut grid out
leave center rib
For Dryer Venting