VEGA VEGAFLEX 83 Profibus PA Polished version - Manual (Page 4)

4
Quick start
VEGAFLEX 83 • Profibus PA
44223-EN-130910
For this adjustment, the distance is entered when the vessel is full
and nearly empty. If these values are not known, an adjustment with
other distances, for example, 10 % and 90 % is also possible. Starting
point for these distance specifications is always the seal surface of
the process fitting.
1. In the menu "Additional settings", menu item "Damping" you can
adjust the requested damping of the output signal.
2. Select the parameter of the current output and the output charac-
teristics in the menu item "Current output".
Further steps