VEGA VEGAFLEX 86 Foundation Fieldbus Coax probe - Manual (Page 45)

45
6 Set up with the display and adjustment module
VEGAFLEX 86 • Foundation Fieldbus
44230-EN-130910
In this menu item you gain access to the protected area where
you can enter special parameters. In exceptional cases, individual
parameters can be modified in order to adapt the sensor to special
requirements.
Change the settings of the special parameters only after having con-
tacted our service staff.
In this menu, you read out the instrument name and the instrument
serial number:
In this menu item, the hardware and software version of the sensor is
displayed.
In this menu item, the date of factory calibration of the sensor as well
as the date of the last change of sensor parameters are displayed via
the display and adjustment module or via the PC.
In this menu item, the identification number of the instrument in a
Foundation Fieldbus system is shown.
In this menu item, the features of the sensor such as approval, pro-
cess fitting, seal, measuring range, electronics, housing and others
are displayed.
Additional adjustments -
Special parameters
Info - Instrument name
Info - Instrument version
Info - Factory calibration
date
Info - Device ID
Info - Sensor character-
istics