VEGA FIBERTRAC 31 Profibus PA User Manual

Page 51

6 Set up with the display and adjustment module

FIBERTRAC 31 • Profibus PA

43833-EN-131119

You can enter the adjustment point (ct/s) manually.

You can let the adjustment point be determined by FIBERTRAC 31.

This menu item appears only if you have selected under adjustment

mode (setup/adjustment mode) the "Two-point adjustment".
In this menu item you can set the max. pulse rate (ct/s) at which the

sensor should switch over.
Empty the vessel until the FIBERTRAC 31 is uncovered.
You thus get the max. pulse rate (ct/s) for the "uncovered" adjustment.
Enter the requested pulse rate manually or let the rate be determined

by FIBERTRAC 31. Automatic determination of the pulse rate should

be given preference.

You can enter the adjustment point (ct/s) manually.

You can let the adjustment point be determined by FIBERTRAC 31.

Since the adjustment is very comprehensive, the menu points of

Function Blocks 1 (FB1) were put together in a submenu.

Adjustment "uncovered"

(two-point adjustment)

Setup - AI FB1