VEGA VEGABAR 83 Modbus and Levelmaster protocol - Operating Instructions - Manual (Page 59)

59
10 Supplement
VEGABAR 83 • Modbus and Levelmaster protocol
46295-EN-131107
Adjustment range of the min./max. adjustment relating to the nominal measuring range:
Ʋ Percentage value -10 … 110 %
Ʋ Pressure value -20 … 120 %
Adjustment range of the zero/span adjustment relating to the nominal measuring range:
Ʋ zero -20 … +95 %
Ʋ span -120 … +120 % 4)
Ʋ Difference between zero and span max. 120 % of the nominal range
Recommended max. turn down 20 : 1 (no limitation)
Nominal measuring ranges and overload capability in bar/kPa
The specifications are only an overview and refer to the measuring cell. Limitations due to the ma-
terial and version of the process fitting are possible. The specifications on the nameplate apply.
Nominal range Overload capacity, max.
pressure
Overload capacity, min. pres-
sure
Gauge pressure
0 … +0.1 bar/0 … +10 kPa
+15 bar/+1500 kPa -1 bar/-100 kPa
0 … +0.4 bar/0 … +40 kPa +30 bar/+3000 kPa -1 bar/-100 kPa
0 … +1 bar/0 … +100 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
0 … +2.5 bar/0 … +250 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
0 … +10 bar/0 … +1000 kPa +90 bar/+9000 kPa -1 bar/-100 kPa
0 … +25 bar/0 … +2500 kPa +130 bar/+13000 kPa -1 bar/-100 kPa
-1 … 0 bar/-100 … 0 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
-1 … +1.5 bar/-100 … +150 kPa +40 bar/+4000 kPa -1 bar/-100 kPa
-1 … +10 bar/-100 … +1000 kPa +90 bar/+9000 kPa -1 bar/-100 kPa
-1 … +25 bar/-100 … +2500 kPa +130 bar/+13000 kPa -1 bar/-100 kPa
-0.05 … +0.05 bar/-5 … +5 kPa +15 bar/+1500 kPa -0.2 bar/-20 kPa
-0.2 … +0.2 bar/-20 … +20 kPa +20 bar/+2000 kPa -0.4 bar/-40 kPa
-0.5 … +0.5 bar/-50 … +50 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
Absolute pressure
0 … 0.1 bar/0 … 10 kPa
15 bar/1500 kPa 0 bar abs.
0 … 0.4 bar/0 … 40 kPa 30 bar/3000 kPa 0 bar abs.
0 … 1 bar/0 … 100 kPa 35 bar/3500 kPa 0 bar abs.
0 … 2.5 bar/0 … 250 kPa 50 bar/5000 kPa 0 bar abs.
0 … 10 bar/0 … 1000 kPa 90 bar/9000 kPa 0 bar abs.
0 … 25 bar/0 … 2500 kPa 130 bar/13000 kPa 0 bar abs.
Nominal measuring ranges and overload capacity in psi
The specifications are only an overview and refer to the measuring cell. Limitations due to the ma-
terial and version of the process fitting are possible. The specifications on the nameplate apply.
4) Values less than -1 bar cannot be set.