VEGA VEGAFLEX 81 4 … 20 mA_HART - four-wire - Manual (Page 39)

39
6 Set up with the display and adjustment module
VEGAFLEX 81 • 4 … 20 mA/HART - four-wire
41825-EN-130314
You can accept the scaling of the level measurement also for the
interface measurement. If you select "Yes", the current setting is
displayed.
If you have selected "No", you can enter the scaling for the interface
separately.
In menu item "Interface (2)" you define the scaling format on the
display and the scaling of the interface measured value for 0 % and
100 %.
In menu item"Current output, size" you determine which measured
value the current output refers to.
In menu item "Current output, adjustment" you can assign a respec-
tive measured value to the current output.
In the menu item "Current output Min./Max.", you determine the reac-
tion of the current output during operation.
Setup - Scaling Interface
(2)
Setup - Current output
Size
Setup - Current output,
adjustment
Setup - Current output
Min./Max.