VEGA VEGAFLEX 86 4 … 20 mA_HART two-wire - Manual (Page 25)

25
4 Mounting
VEGAFLEX 86 • 4 … 20 mA/HART two-wire
41844-EN-130612
In the control system (DCS) you can correct the measurement results
of the VEGAFLEX 86 with these values.
The prerequisite is constant temperature and pressure in the vessel.
Automatic correction via the reference distance
The VEGAFLEX 86 can be equipped optionally with a running time
correction via reference distance. The probe can carry out an auto-
matic running time correction with it.
The reference point must hence not be overfilled. The upper dead
band is hence 450 mm (17.7 in).
2
6
3
4
5
1
2
6
5
4
3
1
7 7
Fig. 15: Measuring ranges - VEGAFLEX 86 with steam compensation
1 Reference plane
2 Probe length L
3 Measuring range
4 Upper dead band
5 Lower dead band
6 Additional upper dead band by steam compensation
7 Reference measurement distance to steam compensation