VEGA VEGASWING 66 - two-wire - Manual (Page 22)

22
6 Setup
VEGASWING 66 • - two-wire
43758-EN-130322
6.2 Adjustment elements
4 1
5
3 2
6
Z
Fig. 14: Electronics module - Two-wire output
1 Signal lamp - red (LED)
2 Signal lamp - yellow (LED)
3 Signal lamp - green (LED)
4 DIL switch for mode adjustment
5 DIL switch for sensitivity adjustment
6 Test key
The instrument monitors the vibrating frequency, electronics tempera-
ture and internal instrument functions.
•
Red LED lights = fault
•
Reaktion on the output
Control lamp for indication of the switching status
With the mode adjustment (4), the switching condition and hence the
function of the signal lamp can be changed.
•
Yellow LED lights = 8 mA
•
Yellow LED off = 16 mA
•
Green LED lights = operating voltage on
With the mode adjustment (min./max.) you can determine the output
current.
Control lamp (1) - fault
indication (red)
Signal lamp (2) - Switch-
ing condition (yellow)
Signal lamp (3) - Operat-
ing condition (green)
Mode adjustment (4)