VEGA FIBERTRAC 31 Foundation Fieldbus - Manual (Page 38)

38
6 Set up with the display and adjustment module
FIBERTRAC 31 • Foundation Fieldbus
41780-EN-131119
Menu Menu item Default value
Setup Measurement loop name Sensor
Isotope Cs-137
Application Level
Background radiation 0 ct/s
Unit of the process value %
Temperature unit ° C
Adjustment min. Min. process value = 0 %
Adjustment max. Max. process value = 100 %
Linearization 0 ct/s = 100 %
90000 ct/s = 0 %
Damping 60 s
Real value correction 0
Mode Overfill protection
Upper switching point - Pro-
cess value
0 %
Lower switching point - Pro-
cess value
0 %
Upper switching point - Tem-
perature
50 °C
Upper switching point - Tem-
perature
25 °C
Reference value - Relay None
Block adjustment Released
Address - Summation Slave free
Display Language Selected language
Displayed value Pulse rate
Display unit ct/s
Additional ad-
justments
Temperature unit °C
Linearisation curve Empty
HART mode Standard
Address 0
With this function
•
Load parameter adjustment data from the sensor into the display
and adjustment module
•
Write parameter adjustment data from the display and adjustment
module into the sensor
This parameter is described in the operating instructions manual
"Display and adjustment module".
Additional adjustments -
Copy instrument settings