VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Profibus PA Approval according to LPR radio standard - Manual (Page 69)

-
Average spectral transmission power
density -34 dBm/MHz EIRP
-
Max. spectral transmission power den-
sity + 6 dBm/50 MHz EIRP
-
Max. power density in a distance of 1 m < 1 µW/cm²
Ambient conditions
Ambient, storage and transport temperature -40 … +80 °C (-40 … +176 °F)
Process conditions
For the process conditions, please also note the specifications on the type label. The lowest value
always applies.
Seal Antenna impedance co-
ne Process temperature (measured on the process
fitting)
FKM (SHS FPM 70C3
GLT) PTFE -40 … +130 °C (-40 … +266 °F)
PTFE 4) -40 … +200 °C (-40 … +392 °F)
PEEK 5) -40 … +200 °C (-40 … +392 °F)
FFKM (Kalrez 6375) PTFE -20 … +130 °C (-4 … +266 °F)
PEEK -20 … +250 °C (-4 … +482 °F)
FFKM (Kalrez 2035) PTFE -15 … +130 °C (5 … +266 °F)
PEEK -15 … +210 °C (5 … +410 °F)
FFKM (Kalrez 6230) PTFE -15 … +130 °C (5 … +266 °F)
PEEK -15 … +250 °C (5 … +482 °F)
Graphite Ceramic -200 … +450 °C (-328 … +842 °F)
Vessel pressure - horn antenna
-
Antenna impedance cone PTFE -1 … 40 bar (-100 … 4000 kPa/-14.5 … 580 psig)
-
Antenna impedance cone PP -1 … 3 bar (-100 … 300 kPa/-14.5 … 43.5 psig)
-
Antenna impedance cone PEEK -1 … 100 bar (-100 … 10000 kPa/-14.5 … 1450 psig)
-
Antenna impedance cone ceramic -1 … 160 bar (-100 … 16000 kPa/-14.5 … 2320 psig)
Vessel pressure - parabolic antenna -1 … 6 bar (-100 … 6000 kPa/-14.5 … 870 psig)
Vessel pressure relating to the flange nom-
inal stage see supplementary instructions manual "Flanges
according to DIN-EN-ASME-JIS"
Vibration resistance
-
Horn antenna 4 g at 5 … 200 Hz according to EN60068-2-6
(vibration with resonance)
4) Not with steam
5) Not with steam
VEGAPULS 62 • Approval according to LPR radio standard 69
11 Supplement
41720
-
EN
-120301