VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Profibus PA Approval according to LPR radio standard User Manual

Page 41

Large distance to the medium

Large angles of repose

Bunker with fast ﬁlling:

Vessel of concrete or metal, also multiple chamber silo:

Structured vessel walls

Installations present

Process/measurement conditions:

Measured value jumps, e.g. by truck loading

Large distance to the medium

Large angles of repose

Heap:

Sensor mounting on movable conveyor belts

Detection of the heap proﬁle

Height detection during ﬁlling

Process/measurement conditions:

Measured value jumps, e.g. by the proﬁle of the heap or
traverses

Large angles of repose

Measurement near the ﬁlling stream

Crusher:

Vessel: installations, wear and protective facilities available

Process/measurement conditions:

Measured value jumps, e.g. by truck loading

Fast reaction time

Large distance to the medium

Demonstration:

Adjustment for all applications which are not typically level
measurement

Sensor accepts all measured value changes within the measuring
range immediately

Typical applications:

Instrument demonstration

Object recognition/monitoring (additional settings required)

Through this selection, the sensor is adapted optimally to the
application or the location and measurement reliability under the
various basic conditions is increased considerably.

Enter the requested parameters via the appropriate keys, save your
settings with [OK] and jump to the next menu item with the [ESC] and
the [->] key.

Also the vessel form can inﬂuence the measurement apart from the
medium and the application. To adapt the sensor to these measure-
ment conditions, this menu item oﬀers you diﬀerent options for vessel
bottom and ceiling in case of certain applications.

Setup/Vessel form

VEGAPULS

62 • Approval according to LPR radio standard

6 Set up with the indicating and adjustment module

41720

-120301