VEGA VEGABAR 66 Profibus PA - climate compensated User Manual
Page 58

58
10 Supplement
VEGABAR 66 • Profibus PA - climate compensated
36792-EN-130321
Ʋ Version with suspension cable PE
-20 … +60 °C (-4 … +140 °F)
Process conditions
The specifications of the pressure stage and product temperature are used as an overview. The
specifications on the type label are applicable.
Process pressure, transmitter
Ʋ with measuring ranges 0.1 bar
(1.45 psig) or 0.2 bar (2.9 psig)
max. 15 bar (217.6 psig) or max. 20 bar (290 psig)
13)
Ʋ with meas. ranges from 0.4 bar
(5.8 psig)
max. 25 bar (363 psig)
14)
Pressure stage, process fitting
Ʋ Threaded fitting
316L PN 3, PVDF PN 5
15)
Ʋ Thread
316L PN 25, PVDF unpressurized
Ʋ Lock fitting
Unpressurized
Ʋ Flange 316L
PN 16 or PN 40
Ʋ Flange GFK
10 bar
Product temperature, suspension cable/measuring cell seal
Ʋ PE/FKM
-20 … +60 °C (-4 … +140 °F)
Ʋ PE/EPDM
-20 … +60 °C (-4 … +140 °F)
Ʋ PUR/FKM
-20 … +80 °C (-4 … +176 °F)
Ʋ PUR/EPDM
-20 … +80 °C (-4 … +176 °F)
Ʋ FEP/FKM
-20 … +100 °C (-4 … +212 °F)
Ʋ FEP/FFKM
-10 … +100 °C (+14 … +212 °F)
Ʋ FEP/EPDM
-20 … +100 °C (-4 … +212 °F)
Product temperature, connection tube/seal meas. cell
Ʋ FKM
-20 … +100 °C (-4 … +212 °F)
Ʋ FFKM
-10 … +100 °C (+14 … +212 °F)
Ʋ EPDM
-20 … +100 °C (-4 … +212 °F)
Product temperature, transmitter protection/seal meas. cell
Ʋ PVDF/FKM or EPDM
-20 … +60 °C (-4 … +140 °F)
Ʋ PVDF/FFKM
-10 … +60 °C (+14 … +140 °F)
Ʋ PE/FKM or EPDM
-20 … +60 °C (-4 … +140 °F)
Calibration position
upright, diaphragm points downward
Influence of the installation position
< 0.2 mbar/20 Pa (0.003 psig)
Vibration resistance
mechanical vibrations with 4 g and 5 … 100 Hz
16)
With version with connection tube, vibration resistance 1 g. With lengths > 0.5 m (1.64 ft) the tube
must be supported in addition.
13)
Limited by the overpressure resistance of the measuring cell.
14)
Limitation by the pressure-tightness of the cable connection.
15)
Limited by the overpressure resistance of the measuring cell.
16)
Tested according to the guidelines of German Lloyd, GL directive 2.