VEGA PROTRAC series 30 Electronics module - Manual (Page 8)

8
4 Mounting
Electronics module • PROTRAC series 30
40104-EN-130916
SIL-qualified instruments may only be operated with a suitable SIL-
qualified electronics module. Furthermore, only an electronics module
with pre-configured serial number may be used.
Compare the sensor serial number on the electronics module with the
sensor serial number on the type label of your sensor.
Check if this sensor serial number is also displayed when switch-
ing on the instrument. The sensor serial number can be displayed
in the display and adjustment module or in the adjustment software
PACTware.
The electronics module is also provided with its own electronics serial
number. This number is only used for internal processes.
Fig. 1: Electronics serial number
A Electronics serial number
B Sensor serial number
The supplied electronics module must be modified for Profibus PA
instruments.
Remove the black cover foil above the two address selection switches
for Profibus PA.
See the following illustration.
Profibus PA