VEGA PLICSMOBILE GSM_GPRS radio module - Manual (Page 20)

?
E 030
l Sensor in boot phase
l value not valid
à Check sensor parameter adjustment
?
E 034
l EEPROM CRC error
à Switch the instrument off and on
à Carry out a reset
à Send instrument for repair
?
E 035
l ROM CRC error
à Switch the instrument off and on
à Carry out a reset
à Send instrument for repair
?
E 036
l Instrument software not executable (during software update or
after failed update)
à Wait until software update is finished
à Carry out another software update
?
E 042
l Hardware error with selfcheck
à Send instrument for repair
?
E 053
l Sensor measuring range not read correctly
à Communication error: Check sensor cable and screening
?
E 086
l Error communication hardware (initialisation of the radio
module failed)
à Initialisation is carried out automatically. If the error exists
permanently, send instrument for repair
20 PLICSMOBILE • GSM/GPRS radio module
6 Maintenance and fault rectification
36849
-EN
-111221