VEGA PLICSMOBILE GSM_GPRS radio module - Manual (Page 13)

Note:
The connection via USB requires a driver. First of all, install the driver
before connecting PLICSMOBILE to the PC.
The required USB driver is included on the CD "DTM Collection".
You should always use the latest version to ensure support of all
instrument functions. The system requirements for operation corre-
spond to those of the "DTM Collection" or of PACTware.
During installation of the "DTM Collection", the appropriate instrument
driver is installed automatically. When PLICSMOBILE is connected,
the driver installation is completed autonomously and is ready for
operation without a restart.
1
3
2
Fig. 5: Connection of the PC via USB
1 USB interface of the PC
2 Mini-USB connection cable (in the scope of delivery)
3 USB interface of PLICSMOBILE
5 .3 Parameter adjustment with PACTware
For adjustment via PC, the configuration software PACTware
and a suitable instrument driver (DTM) according to FDT standard are
required. The up-to-date PACTware version as well as all available
DTMs are compiled in a DTM Collection. The DTMs can also be
integrated in other frame applications according to FDT standard.
Note:
To ensure that all instrument functions are supported, you should
always use the latest DTM Collection. Furthermore, not all described
functions are included in older firmware versions. You can download
the latest instrument software from our homepage. A description of the
update procedure is also available in the Internet.
The general software handling is described in the operating
instructions manual "DTM Collection/PACTware" attached to each
DTM Collection and which can also be downloaded from the Internet.
Detailed descriptions are available in the online help of PACTware and
the DTMs.
Prerequisites
PLICSMOBILE • GSM/GPRS radio module 13
5 Set up
36849
-EN
-111221