VEGA VEGABAR 67 Profibus PA - Manual (Page 40)

40
6 Set up with the display and adjustment module PLICSCOM
VEGABAR 67 • Profibus PA
36743-EN-130321
This function enables reading out parameter adjustment data as well
as writing parameter adjustment data into the sensor via the display
and adjustment module. A description of the function is available in
the operating instructions manual "Display and adjustment module".
The following data are read out or written with this function:
•
Measured value presentation
•
Adjustment
•
Damping
•
Linearization curve
•
Sensor-TAG
•
Displayed value
•
Scaling unit (Out-Scale unit)
•
Positions after the decimal point (scaled)
•
Scaling PA/Out-Scale 4 values
•
Unit of measurement
•
Language
The following safety-relevant data are not read out or written:
•
Sensor address
•
PIN
•
Application
Copy sensor data
Copy sensor data?
The reset function resets all parameters adjusted by the user to the
delivery status and the peak values to the actual values.
Reset
Select reset?
▼
Reset
Basic adjustment
Peak value, measured value
Peak value, temperature
Basic adjustment
The "Reset" "Basic adjustment" resets the values of the following
menu items:
Menu section Function Reset value
Basic settings Sensor address 126
Zero/Min. adjustment Measuring range begin
Span/Max. adjustment Measuring range end
Density 1 kg/l
Density unit kg/l
Copy sensor data
Reset