VEGA VEGABAR 55 4 … 20 mA User Manual

Page 40

7 Maintenance and fault rectification

VEGABAR 55 • 4 … 20 mA

36733-EN-130321

data and displays the actual hardware and software version of the

sensor. This takes approximately 60 s.
Push the button "Update software" and select the previously extracted

hex file. Then the software update can be started. The additional files

are installed automatically. Depending on the sensor, this procedure

lasts up to 1 h. Then the message appears ""Software update suc-

cessfully executed".

7.6 Instrument repair

If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from our Internet homepage

www.vega.com under: "Downloads - Forms and certificates - Repair

form".
By doing this you help us carry out the repair quickly and without hav-

ing to call back for needed information.

•

Print and fill out one form per instrument

•

Clean the instrument and pack it damage-proof

•

Attach the completed form and, if need be, also a safety data

sheet outside on the packaging

•

Please ask the agency serving you for the address of your return

shipment. You can find the respective contact data on our website