VEGA VEGABAR 55 4 … 20 mA - Manual (Page 31)

31
6 Set up with the display and adjustment module PLICSCOM
VEGABAR 55 • 4 … 20 mA
36733-EN-130321
The following data are read out or written with this function:
•
Measured value presentation
•
Adjustment
•
Damping
•
Linearization curve
•
Sensor-TAG
•
Displayed value
•
Display unit
•
Scaling
•
Current output
•
Unit of measurement
•
Language
The following safety-relevant data are not read out or written:
•
SIL
•
HART mode 5)
•
PIN
•
Application
Copy sensor data
Copy sensor data?
The reset function resets all parameters adjusted by the user to the
delivery status and the peak values to the actual values.
Reset
Select reset?
▼
Reset
Basic adjustment
Peak value, measured value
Peak value, temperature
Basic adjustment
The "Reset" "Basic adjustment" resets the values of the following
menu items:
Menu section Function Reset value
Basic settings Zero/Min. adjustment Measuring range begin
Span/Max. adjustment Measuring range end
Density 1 kg/l
Density unit kg/l
Damping 1 s
Linearization Linear
Sensor-TAG Sensor
Reset
5) With instruments with signal output 4 … 20 mA/HART