VEGA VEGACAP 65 - Relay (DPDT) - Manual (Page 28)

28
9 Supplement
VEGACAP 65 • - Relay (DPDT)
30016-EN-130916
9 Supplement
9.1 Technical data
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - thread 316L
Ʋ Process fitting - flange 316L
Ʋ Process seal Klingersil C-4400
Ʋ insulation (partly insulated) PA, PTFE
Ʋ Probe (cable partly PTFE insulated:
ø 6 mm/0.236 in)
316L
Ʋ Probe (cable PTFE partly insulated:
ø 8 mm/0.315 in) 1)
Steel
Ʋ Probe (cable PA partly insulated:
ø 11 mm/0.433 in) 2)
Steel
Ʋ Gravity weight 316L + PEEK
Materials, non-wetted parts
Ʋ Plastic housing plastic PBT (Polyester)
Ʋ Aluminium die-casting housing Aluminium die-casting AlSi10Mg, powder-coated - basis:
Polyester
Ʋ Stainless steel housing - precision
casting
316L
Ʋ Stainless steel housing, electropol-
ished
316L
Ʋ Seal between housing and housing
cover
NBR (stainless steel housing, precision casting), silicone
(aluminium/plastic housing; stainless steel housing,
electropolished)
Ʋ Ground terminal 316L
Process fittings
Ʋ Pipe thread, cylindrical (DIN 3852-A) G1 A, G1½ A
Ʋ American pipe thread, conical
(ASME B1.20.1)
1 NPT, 1½ NPT
Ʋ Flanges DIN from DN 50, ANSI from 2"
Weight
Ʋ Instrument weight (depending on
process fitting)
0.8 … 4 kg (0.18 … 8.82 lbs)
Ʋ Gravity weight 900 g (32 oz)
Ʋ Cable weight: ø 6 mm (0.236 in) 180 g/m (1.9 oz/ft)
Ʋ Cable weight: ø 8 mm (0.315 in) 220 g/m (2.36 oz/ft)
Ʋ Cable weight: ø 11 mm (0.433 in) 230 g/m (2.47 oz/ft)
1) Cable connected electrically conductive with the gravity weight.
2) Cable connected electrically conductive with the gravity weight.