VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) standpipe ver. Profibus PA - Manual (Page 44)

10 Supplement
10.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
-
Process fitting 316L, Hastelloy C22 plated
-
Antenna 316L, Hastelloy C22
-
Antenna cone PTFE (TFM 1600), ceramic (99.7 % AL
2
O
3
)
-
seal, antenna system FKM (Viton), FFKM (Kalrez 6375), FEP FKM (Viton)
coated, EPDM (FDA-approved), graphite
-
Standpipe 316L, Hastelloy C22
Materials, non-wetted parts
-
Housing Plastic PBT (polyester), Alu die-casting powder-
coated, 316L
-
Seal between housing and housing
cover NBR (stainless steel housing), silicone (Alu/plastic
housing)
-
Inspection window in housing cover for
PLICSCOM Polycarbonate (UL-746-C listed)
-
Ground terminal 316Ti/316L
Weight without standpipe 6.3 … 136 kg (13.9 … 300 lbs), depending on
flange size, pressure stage and housing material
Weight, standpipe 3.2 kg/m (2.2 lbs/ft)
Standpipe length up to 5.85 m (19.19 ft)
Output variable
Output signal digital output signal, format according to IEEE-754
Sensor address 126 (default setting)
Current value 10 mA, ±0.5 mA
Damping (63 % of the input variable) 0 … 999 s, adjustable
Input variable
Measured value Distance between lower edge of the sensor flange
and product surface
Min. distance 0 mm
Measuring range up to 5.85 m (19.19 ft) 7)
7) According to the respective standpipe length.
44 VEGAPULS 66 standpipe version • Profibus PA
10 Supplement
28743
-EN
-090305