VEGA VEGAPULS 68 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA_HART two-wire - Manual (Page 53)

l A t the factory by VEGA
l O r on site by the user
I n both cases, the sensor serial number is needed. The serial numbers
are stated on the type label of the instrument, inside the housing or on
the delivery note.
Information:
W
hen loading on site, first of all the order data must be downloaded
from the Internet (see operating instructions manual "Oscillator").
T he electronics modules are adapted to the respective sensor and
distinguish also in the signal output or power supply.
8.4 Software update
T he following components are required to update the sensor software:
l S ensor
l P ower supply
l VEGACONNECT
l PC with PACTware
l C
urrent sensor software as file
A t "www.vega.com/downloads" go to "Software". Select under "plics
instruments and sensors" the suitable instrument series. Load the zip
fi
le via the right mouse key with "Save target as" e.g. on the desktop of
your PC. Extract all files available in the zip file, e.g. to the desktop.
C onnect the sensor to power supply and provide connection from PC
to the instrument via VEGACONNECT. Start PACTware and provide
connection to the sensor, e.g. via the VEGA project assistant. Close
the parameter window of the sensor, as far as open.
G o in the PACTware menu bar to "Instrument data", "Additional
functions" and "Update instrument software".
PACT ware checks now the actual hardware and software version of
the sensor and displays the data. This procedure lasts approx. 60 s.
P ush the button " Update software" and select the previously
extracted hex file. Then the software update can be started. Further
fi
les are installed automatically. Depending on the sensor, this
procedure lasts approximately 1 h.
8.5 Instrument repair
I
f a repair is necessary, please proceed as follows:
Y ou can download a return form (23 KB) from our Internet homepage
www.vega.com under: "Downloads - Forms and certificates - Repair
form".
Assignment
Load sensor software to
PC
Prepare update
Load software into sen-
sor
VEGAPULS 68 • 4 … 20 mA/HART two-wire 53
8 M aintenance and fault rectification
29261
-EN
-090305