VEGA VEGAPULS 51K…54K Profibus PA - Manual (Page 10)

10 VEGAPULS 51P … 54P
24890-EN-041227
Product description
Adjustment with SIMATIC PDM adjust-
ment program
To adjust all essential functions of the VEGA
sensor with the adjustment station SIMATIC
PDM from Siemens, a so-called EDD is re-
quired. Without this EDD, only the basic func-
tions such as min./max. wet adjustment or
integration time can be adjusted with the
PDM adjustment program. Further important
adjustment functions, such as the input of the
meas. environment or a false echo storage
are not available without EDD. After integra-
tion of the EDD files in the Simatic PDM ad-
justment software, all important adjustment
functions are accessible. If it is not at hand,
the obligatory GSD (instrument master file)
as well as the EDD (Electronic Device De-
scription) necessary for PDM can be
downloaded from the VEGA homepage
(www.vega.com).
- + ESC
OK
2
4
Tank 1
m (d)
12.345
- + ESC
OK
Tank 1
m (d)
12.345
PA-Bus
Adjustment with detachable adjustment module. The
adjustment module can be plugged into the radar
sensor or into the external indicating instrument
VEGADIS 50.
Detachable adjustment module MINICOM
- +
ESC
OK
Tank 1
m (d)
12.345
Adjustment with the adjustment module
MINICOM
With the small (3.2 cm x 6.7 cm) 6-key ad-
justment module with display, sensor-relevant
adjustments can be carried out directly on
the sensor.
The adjustment module can be plugged into
the radar sensor or into the optional, external
indicating instrument.
With the adjustment module MINICOM, the
sensor can be adjusted and the basic func-
tions (parameters) set. Beside the measuring
environment and the simulation mode, it is
also possible to set the Profibus address
and to carry out a false echo memory, see
„6.3 Adjustment with MINICOM“.
max. 25 m