VEGA VEGAFLEX 55P (Profibus PA) - Manual (Page 8)

8 VEGAFLEX 55P (Profibus PA)
Product description
2
4
4 ... 20 mA
- + ESC
OK
Tank 1
m (d)
12.345
- + ESC
OK
Tank 1
m (d)
12.345
Adjustment with detachable adjustment module. The
adjustment module can be plugged into the sensor or
into the external indicating instrument VEGADIS 50.
Detachable adjustment module MINICOM
- +
ESC
OK
Tank 1
m (d)
12.345
max. 25 m
Adjustment with adjustment module
MINICOM
With the small (3.2 cm x 6.7 cm) 6-key ad-
justment module with display, you can carry
out the sensor-relevant adjustments directly
in the sensor.
The adjustment module can be plugged into
the sensor or into the optional, external indi-
cating instrument.
With the adjustment module MINICOM, you
can adjust the sensor and set the basic
functions. Beside setting the measurement
conditions and the simulation mode, it is also
possible to assign the Profibus address and
carry out a false echo storage, see "4.2
Adjustment with the adjustment module
MINICOM“.
Adjustment with the SIMATIC PDM
adjustment program
To adjust all essential functions of the VEGA
sensor with the adjustment station SIMATIC
PDM from Siemens, a so-called EDD is
required. Without this EDD, only the basic
functions such as min./max. wet adjustment
or integration time can be adjusted with the
PDM adjustment program. Further important
adjustment functions, such as the input of the
"
Meas. environment“ or a false echo storage,
are not available without EDD. After
integration of the EDD files in the Simatic PDM
adjustment software, all important adjustment
functions are accessible. If it is not at hand,
the obligatory GSD (instrument master file)
as well as the EDD (Electronic Device De-
scription) necessary for PDM can be
downloaded from the VEGA Homepage
(http://www.vega.com).